HP 8100 - Elite Convertible Minitower PC Посібник з швидкого налаштування та початку роботи - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування та початку роботи для Робочий стіл HP 8100 - Elite Convertible Minitower PC. HP 8100 - Elite Convertible Minitower PC 21 сторінка. Hp compaq convertible minitower business pc
Також для HP 8100 - Elite Convertible Minitower PC: Технічні характеристики (2 сторінок), Список підтримки (34 сторінок), Посібник з налаштування програмного забезпечення (9 сторінок), Посібник з налаштування та конфігурації (48 сторінок), Ілюстрована карта запчастин та сервісного обслуговування (4 сторінок)

Use HP Vision Diagnostics to determine if all the devices installed on the

computer are recognized by the system and functioning properly. Running

tests is optional but recommended after installing or connecting a new

device.

You should run tests, save the test results, and print them so that you have

printed reports available before placing a call to the Customer Support

Center.

NOTE:

Accessing HP Vision Diagnostics (Windows systems)

To access HP Vision Diagnostics, you must burn the utility onto a CD or

copy it onto a USB flash drive then boot to the CD or USB flash drive. It

can also be downloaded from

or installed to a USB flash drive. See

HP Vision Diagnostics on page 7

NOTE:

only.

If you have already downloaded HP Vision Diagnostics to either a CD or

USB Flash drive, then begin the following procedure at step 2.

In Windows Explorer, go to C:\SWSetup\ISOs and burn the file Vision

Diagnostics.ISO to a CD or copy it to a USB flash drive.

While the computer is on, insert the CD in the Optical Drive or USB

flash drive in a USB port on the computer.

Shut down the operating system and turn off the computer.

Turn on the computer. The system will boot into HP Vision Diagnostics.

NOTE:

the USB flash drive, you may need to change the boot order in the

Computer Setup (F10) utility. Refer to the Maintenance and Service

Guide (English only) for more information.

At the boot menu, select either the HP Vision Diagnostics utility to

test the various hardware components in the computer or the HP

Memory Test utility to test memory only.

NOTE:

utility that is run as a stand-alone application, outside of HP Vision

Diagnostics.

Quick Setup & Getting Started

Third party devices may not be detected by HP Vision Diagnostics.

HP Vision Diagnostics is included with some computer models

If the system does not boot to the CD in the optical drive or to

The HP Memory Test is a comprehensive memory diagnostic

http://www.hp.com

Downloading the Latest Version of

for more information.

and either burned to CD

ENWW