Miele GAS COMBISET CS 1012 Instrukcja obsługi i instalacji - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Płyta grzewcza Miele GAS COMBISET CS 1012. Miele GAS COMBISET CS 1012 44 stron. Double gas combiset
Również dla Miele GAS COMBISET CS 1012: Instrukcja obsługi i instalacji (44 strony), Wymiary produktu (4 strony), Instrukcje konwersji (40 strony)
Drukuj stronę
Cleaning and care
Never use a steam cleaner to clean
this combiset. Pressurized steam
could cause permanent damage to
the surface and to components for
which the manufacturer cannot
accept responsibility.
Do not use any sharp or pointed
objects which could damage the
seal between the frame and the
countertop.
Never use scouring agents, pads,
abrasive cleaning agents, or strong
cleaners, e.g. oven sprays, stain or
rust removers, these could damage
the surface of the appliance.
Keep the ignitor in the burner dry. If
it gets wet it will not spark.
Dry your combiset thoroughly after
cleaning it to prevent lime deposits.
Spills containing salt or sugar should
be cleaned immediately.
16
Combiset
Let the appliance cool to a safe
temperature before removing the
grates.
^ Clean the grates, combiset and
knobs with a sponge and a mild
solution of warm water and liquid
dish soap.
^ Soak baked or hardened spills.
Dry the combiset and grates
thoroughly after cleaning.
The stainless steel surfaces can be
cleaned using a non-abrasive stainless
steel cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
These cleaning products are available
from Miele.
Do not use stainless steel cleaner on
or around the printing, it may rub
off. Use only a soft sponge with
some dish liquid and warm water to
clean this area.