Miele GAS COMBISET CS 1012 Çalıştırma ve Kurulum Talimatları - Sayfa 16

Setüstü Ocak Miele GAS COMBISET CS 1012 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele GAS COMBISET CS 1012 44 sayfaları. Double gas combiset
Ayrıca Miele GAS COMBISET CS 1012 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar), Ürün Boyutları (4 sayfalar), Dönüştürme Talimatları (40 sayfalar)

Miele GAS COMBISET CS 1012 Çalıştırma ve Kurulum Talimatları

Cleaning and care

Never use a steam cleaner to clean
this combiset. Pressurized steam
could cause permanent damage to
the surface and to components for
which the manufacturer cannot
accept responsibility.
Do not use any sharp or pointed
objects which could damage the
seal between the frame and the
countertop.
Never use scouring agents, pads,
abrasive cleaning agents, or strong
cleaners, e.g. oven sprays, stain or
rust removers, these could damage
the surface of the appliance.
Keep the ignitor in the burner dry. If
it gets wet it will not spark.
Dry your combiset thoroughly after
cleaning it to prevent lime deposits.
Spills containing salt or sugar should
be cleaned immediately.
16
Combiset
Let the appliance cool to a safe
temperature before removing the
grates.
^ Clean the grates, combiset and
knobs with a sponge and a mild
solution of warm water and liquid
dish soap.
^ Soak baked or hardened spills.
Dry the combiset and grates
thoroughly after cleaning.
The stainless steel surfaces can be
cleaned using a non-abrasive stainless
steel cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
These cleaning products are available
from Miele.
Do not use stainless steel cleaner on
or around the printing, it may rub
off. Use only a soft sponge with
some dish liquid and warm water to
clean this area.