Miele GAS KM 81-2 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Płyta grzewcza Miele GAS KM 81-2. Miele GAS KM 81-2 32 stron. Gas
Również dla Miele GAS KM 81-2: Instrukcja obsługi (44 strony)

Drukuj stronę

Warning and Safety Instructions

Important safety instructions

This appliance complies with all rele-

vant legal safety requirements. Im-

proper use of the appliance can,

however, present a risk of both per-

sonal injury and material damage.

Before installing and using the ap-

pliance for the first time, read the

operating instructions carefully.

They give information on safety, on

the operation and care of the ap-

pliance. This way you will avoid the

risk of accidents and damage to the

appliance.

Do not let children access the ap-

pliance or its controls. Supervise its

use by the elderly or infirm.

Keep these instructions in a safe

place and pass them on to any fu-

ture user.

Correct usage

This appliance is intended for do-

mestic use, and in particular to

cook, fry or reheat food. Any other

usage is at the owner's risk and could

be dangerous. The manufacturer can-

not be held responsible for damage

caused by improper use of the ap-

pliance.

Technical safety

Please ensure that the domestic

electrical supply corresponds to

the information on the data plate.

You should find out details about the

type of gas and calorific value from

your Gas supplier and compare this in-

formation with the type of gas quoted

on the data plate.

They must correspond.

The electrical safety of this ap-

pliance can only be guaranteed

when continuity is complete between

the appliance and an effective earthing

system.

It is imperative that this basic safety re-

quirement be tested and where there is

any doubt, the electrical system of the

house should be checked out by a

qualified electrician. The manufacturer

cannot be held responsible for damage

such as electric shock caused by the

lack or inadequacy of an effective ear-

thing system.

For safety reasons the appliance

must only be operated after it has

been built-in. This is necessary to en-

sure that all electric components are

shielded.

Ensure that the gas pipe and elec-

trical cable are installed in such a

way that they do not touch any parts of

the appliance which become hot. This

could cause damage.