Miele GAS KM 81-2 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Miele GAS KM 81-2. Miele GAS KM 81-2 32 страницы. Gas
Также для Miele GAS KM 81-2: Руководство по эксплуатации (44 страниц)
Печатать страницу
Warning and Safety Instructions
Warning and Safety Instructions
Important safety instructions
This appliance complies with all rele-
vant legal safety requirements. Im-
proper use of the appliance can,
however, present a risk of both per-
sonal injury and material damage.
Before installing and using the ap-
pliance for the first time, read the
operating instructions carefully.
They give information on safety, on
the operation and care of the ap-
pliance. This way you will avoid the
risk of accidents and damage to the
appliance.
Do not let children access the ap-
pliance or its controls. Supervise its
use by the elderly or infirm.
Keep these instructions in a safe
place and pass them on to any fu-
ture user.
Correct usage
This appliance is intended for do-
mestic use, and in particular to
cook, fry or reheat food. Any other
usage is at the owner's risk and could
be dangerous. The manufacturer can-
not be held responsible for damage
caused by improper use of the ap-
pliance.
6
Technical safety
Please ensure that the domestic
electrical supply corresponds to
the information on the data plate.
You should find out details about the
type of gas and calorific value from
your Gas supplier and compare this in-
formation with the type of gas quoted
on the data plate.
They must correspond.
The electrical safety of this ap-
pliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system.
It is imperative that this basic safety re-
quirement be tested and where there is
any doubt, the electrical system of the
house should be checked out by a
qualified electrician. The manufacturer
cannot be held responsible for damage
such as electric shock caused by the
lack or inadequacy of an effective ear-
thing system.
For safety reasons the appliance
must only be operated after it has
been built-in. This is necessary to en-
sure that all electric components are
shielded.
Ensure that the gas pipe and elec-
trical cable are installed in such a
way that they do not touch any parts of
the appliance which become hot. This
could cause damage.