ALLO STM Instrukcja szybkiej instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Firewall ALLO STM. ALLO STM 11 stron. Sip threat manager
Również dla ALLO STM: Instrukcja szybkiej instalacji (9 strony)
Drukuj stronęSTM Quick Installation Guide
STM Appliance 1
The STM package includes:
1 STM Appliance
1 USB Power Adapter
1 Serial Console Cable
2 Ethernet Cables
3. Initial Setup & Configuration
1. Unpack the items from the box
2. Check that you have all the items listed in the package content.
3. Connect the LAN port of the STM to the PBX/VOIP Gateway.
4. Connect the WAN port of the STM to the untrusted/public network.
5. Connect the appliance to the power socket using the USB power cable.
6. The device will take about a minute to boot up & will be fully functional with the default
configuration.
Some of the PBX/Gateway devices may have an exclusive LAN/Mgmt Interface for device
management purpose other than the Data Interface (also referred as the WAN/Public Interface).
In such cases LAN port of the STM should be connected to the Data Interface (WAN/Public
Interface).
www.allo.com
Figure 5: Scenario 3
Version 2.0
7