Miller Coolmate 3 CE Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Miller Coolmate 3 CE. Miller Coolmate 3 CE 20 stron.

6-3. Troubleshooting

Trouble

Coolant system does not work.

Decreased or no coolant flow.

SECTION 7 − ELECTRICAL DIAGRAM

Dia.

Part

Mkgs.

No.

. . . . . . . . . . . . . . . .

239494

A complete Parts List is available at www.MillerWelds.com

Be sure input power cord is plugged in to energized receptacle.

Check line fuses or circuit breaker, and replace or reset if necessary.

Motor overheated. Unit starts running when motor has cooled.

Have Factory Authorized Service Agent check Power switch S1 and motor Mot.

Add coolant.

Check for clogged hoses or coolant filter. Clean filter or clean / replace hoses if necessary.

Disconnect pump, and check for sheared coupling. Replace coupling if necessary.

SECTION 8 − PARTS LIST

Description

Recommended Spare Parts

. . . .

Screen, Filter LP Cyl 100x100x0.0045 SST

Remedy

Circuit Diagram For 115/230 Volt Models

. . . . . . . . . . . . . . . . . . . . . . . .

135796-D

Quantity

OM-628 Page 11