Diamatic BS-110 MKIII Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Diamatic BS-110 MKIII. Diamatic BS-110 MKIII 16 stron.

True parkay flooring scoring is not necessary. It will come up in small pieces.

When working over plywood sub-flooring, try to run machine in the same direction as

the grain in the wood. Blade in most cases bevel down. On solid wood floors like plank, run in the same

direction as the plank, not cross grain or cross plank. Removing the front counterweights will help on all soft

surfaces.

Concrete

When working on concrete slab, normal blade position is bevel up for best performance, especially when

cleaning adhesive. On occasion, bevel down gives better blade life.

Gibcrete and soft poured flooring

Usually require blade level down to create a better wearing surface, although bevel up may work if some

weights are removed.

Beware of expansion joints and floor mounted receptacles or other obstacles in the floor.

Remove weights

To remove weights, unscrew two M12 nuts at the front and remove the cover. Now it is possible to remove

weights by hand. By mounting the cover check if the cover is good positioned and if the two nuts are good

tightened.