Miller Axcess 675 Instrukcja obsługi - Strona 34
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria spawalnicze Miller Axcess 675. Miller Axcess 675 48 stron. Automatic welding interface and arc welding power source
Również dla Miller Axcess 675: Instrukcja obsługi (48 strony)
Drukuj stronę9-2. Process Control Module PC4 Diagnostic LEDs
9-3. Diagnostic LEDs On Process Control Module PC4
LED
Status
1
On
Off
2
On
Off
3,4
On
Off
OM-217 751 Page 30
Indicates −25 volts DC is present on process control module PC4
Indicates −25 volts DC is not present on process control module PC4
Indicates +25 volts DC is present on process control module PC4
Indicates +25 volts DC is not present on process control module PC4
See Network Status Table in Section 9-4
See Network Status Table in Section 9-4
1
Process Control Module PC4
Diagnostic LEDs are visible inside unit,
1
located on PC4 mounted on the top tray.
Refer to Section 9-3 for information on
diagnostic LEDs.
Reinstall cover after checking diagnostic
LED1
LEDs.
LED2
LED3
LED4
Diagnosis
216 956-A / Ref. 803 825-A