Miller CoolBand II Oryginalna instrukcja obsługi - Strona 27
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Akcesoria spawalnicze Miller CoolBand II. Miller CoolBand II 40 stron. Integrated headgear cooling system
Drukuj stronę
3-8.
Operating The Controls (Continued)
.
Do not restrict or
alter
headgear
cooling system air
flow. Do not block
air holes (includ-
ing
upper
lower holes). Be
sure
glasses,
weld cap, and oth-
er objects do not
block air flow.
1
Power Button
To Start: Press Power
button. Blower assembly
OM-262 902 Page 24
starts when button is re-
leased.
To Stop: Press Power
button again.
and
.
Use light pressure
safety
on Power button to
hair,
turn unit off.
2
Battery Level Light
When powered up, light
turns on green for two
seconds and then flash-
es once per second as
long as battery charge is
above 25 percent.
When battery charge
falls below 25 percent,
light flashes red once
per second.
When the battery charge
is
depleted,
the fan
stops running and the
red light flashes con-
stantly. See Section 3-4
for battery charging in-
formation.