Miller 1014 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Miller 1014. Miller 1014 12 stron. Arrow series fluid head with euro camera platform

Drukuj stronę

ILLUMINATION BUTTON

BATTERY

BATTERY DOOR

FIG 7

RETAINING SCREW

7 BATTERY REPLACEMENT

The Arrow illumination feature uses a standard long–life

alkaline 12v battery. Under most operating conditions the

battery will provide two years of operation.

Miller approves use of the following batteries: Duracell MN21,

Eveready A23, Vinnic L 1028. Other GP23A batteries also fit.

To change the BATTERY:

7.1 Unscrew the two battery door RETAINING SCREWS and

remove the BATTERY DOOR.

7.2 Remove the BATTERY.

7.3 Insert a new battery, negative end (-) first

7.4 Replace BATTERY DOOR and RETAINING SCREWS.

7.5 Press the ILLUMINATION BUTTON to test operation.

CLEANING

WARNING: Do not immerse in any liquid.

WARNING: Do not use stiff brushes, abrasives, or solvents.

Arrow heads feature protective coatings, dust and moisture

seals and anti-corrosive fittings to ensure long and trouble free

operation, even in harsh environments. To ensure optimum

performance through the life of the head Miller recommends

basic routine maintenance.

When Arrow heads have been used in harsh environments

(such as sand, mud or salt water spray), wipe over with a soft

damp cloth as soon as possible. Use a soft brush to clean

crevices. Remove and clean CAMERA PLATE.