Miller Digital Performance Series Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria motocyklowe Miller Digital Performance Series. Miller Digital Performance Series 32 stron. Auto-darkening helmets
Również dla Miller Digital Performance Series: Podręcznik (32 strony), Podręcznik (28 strony)
Drukuj stronę
SECTION 6 – REPLACING LENS COVERS
6-1.
Replacing Outside Lens Covers On Digital Elite And
Performance Quick-Release Helmets
1
2
2
4
3
Never use the auto-
darkening lens with-
out the inside and
outside lens covers
properly
Welding spatter will
damage
the
darkening lens and
void the warranty.
1 Front Lens Holder
2 Release Points
3 Lens Cover
4 Gasket
Remove front lens holder by
pressing release points and
pulling the holder away from
the helmet.
Remove lens cover and gas-
ket from the holder. Replace
lens cover and reinstall gasket
and lens in holder. Reinstall
holder in helmet.
�
Be sure the flat side of
lens cover gasket faces
the lens cover holder.
OM-256476 Page 15
installed.
auto-