AquaScape 45038 Instrukcje instalacji

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Odbiornik AquaScape 45038. AquaScape 45038 2 stron. Smart control receiver
Również dla AquaScape 45038: Instrukcje instalacji (2 strony), Instrukcje instalacji (2 strony)

Drukuj stronę

I N S T A L L A T I O N

SMART CONTROL

RECEIVER

Smart Control Receiver

Item #45038

Contents - #45038

No.

Description

Smart Control Receiver

Smart Control Conversion Plug

REQUIRED

• Adequate Wi-Fi coverage reaching to the unit (2.4 GHz networks

supported)

• Aquascape Smart Control App (available on iOS or Android App Store)

Safety Information

WARNING: It is recommended whenever working in or near

water to have all electrical devices plugged into a ground fault

interrupter (GFCI) that has been installed by a licensed electrician.

• The power cable should be protected at all times to avoid punctures,

cuts, bruises, and abrasion.

IMPORTANT: Aquascape, Inc. is not responsible for losses,

injury, or death resulting from a failure to observe these safety

precautions, misuse or abuse of pumps or equipment.

Installation

• Mount the receiver above the ground on a post, fence, or wall. Avoid

installing this device in direct sunlight. Install in a cool shaded area if

possible (Ex. 1).

• Connect the pump to the Smart Control Receiver.

NOTE: If connecting a previous generation of the Adjustable Flow Pump,

please use the included Conversion Plug (Ex. 2).

PAIRING PROCEDURE

• Plug the Smart Control Receiver into an outdoor rated GFCI, and the unit

will automatically enter pairing mode (Ex. 1).

Ex. 1

NOTE: The blinking blue light on the face of the unit indicates the receiver

is in pairing mode and ready to be connected.

• Download the Aquascape Smart Control App (available on iOS or

Android App Store).

P R O F E S S I O N A L G R A D E / C L A S S E P R O F E S S I O N N E L L E

Ex. 2

I N S T R U C T I O N S

• Open the Aquascape Smart Control App and click 'Create New Account'.

NOTE: If you already have an account,

• Once logged in, click the three dashes in

the upper right-hand corner of the home

screen (Ex. 3).

• Click 'Add New Device' (Ex. 4).

NOTE: Adequate Wi-Fi coverage is

required (2.4 GHz networks supported).

• Continue to follow on-screen instructions

to complete the pairing process.

• To reset the device to factory defaults, first turn unplug and plug the

unit in. Next make sure the unit is off by pressing the power button and

confirming nothing is on the LCD screen, then press and hold the + and

- buttons for four seconds and release when the LCD display lights up

completely showing 8888 (Ex. 5).

• The receiver includes a switch that allows the pump to be operated in the

two following modes (Ex. 6).

Ex. 5

Position 1 - Operated by Aquascape Smart Control App or remote

control

–

Position 2 - Bypass control, and operate at full flow-rate

• In the event of a power loss the pump will revert to the last flow-rate setting.

Troubleshooting

• Device won't pair

– Make sure the outlet is receiving power

– Make sure you have adequate wireless coverage to connect the

device (2.4 GHz networks supported)

– Reset your wireless router

– Reset the device to factory defaults

– Make sure the ground-fault circuit interrupter (GFCI) is not tripped

• Receiver displays an E1 message

– This means the input voltage going to the receiver is greater than

142 volts. Have an electrician inspect the outlet you have the receiver

plugged into

• Receiver displays an E2 message

– Receiver is overheating - make sure the receiver is in a shady or cooler

area away from direct, intense sunlight

Warranty Information

3 YEAR WARRANTY

Aquascape warrants that the Smart Control Receiver will be free of

manufacturing defects for three years after date of purchase. Proof of

purchase required. Warranty does not cover damage resulting from electrical

supply problems, improper wiring, lightning, negligent handling, misuse, or

lack of reasonable maintenance or care. If upon Aquascape's inspection, the

receiver shows evidence of a manufacturing defect, Aquascape's liability is

limited, at Aquascape's option, to the repair of the defect, or the replacement

of the defective product or refund of the original purchase price. The

warranty excludes costs of labor, removal of product, shipping and expenses

related to the installation and re-installation of the product. No liability for loss

or damage of any nature or kind, whether arising out of or from the use of the

product, whether defective or not defective, is assumed by Aquascape, Inc.

or its affiliates. Aquascape shall not be liable for any incidental, consequential

or other damages arising under any theory of law whatsoever.

Ex. 3

Ex. 4

Ex. 6