AquaScape 45038 Instruções de instalação
Procurar online ou descarregar pdf Instruções de instalação para Recetor AquaScape 45038. AquaScape 45038 2 páginas. Smart control receiver
Também para AquaScape 45038: Instruções de instalação (2 páginas), Instruções de instalação (2 páginas)
Imprimir página
I N S T A L L A T I O N
SMART CONTROL
RECEIVER
Smart Control Receiver
Item #45038
Contents - #45038
No.
Description
1.
Smart Control Receiver
2.
Smart Control Conversion Plug
REQUIRED
• Adequate Wi-Fi coverage reaching to the unit (2.4 GHz networks
supported)
• Aquascape Smart Control App (available on iOS or Android App Store)
Safety Information
WARNING: It is recommended whenever working in or near
water to have all electrical devices plugged into a ground fault
interrupter (GFCI) that has been installed by a licensed electrician.
• The power cable should be protected at all times to avoid punctures,
cuts, bruises, and abrasion.
IMPORTANT: Aquascape, Inc. is not responsible for losses,
injury, or death resulting from a failure to observe these safety
precautions, misuse or abuse of pumps or equipment.
Installation
• Mount the receiver above the ground on a post, fence, or wall. Avoid
installing this device in direct sunlight. Install in a cool shaded area if
possible (Ex. 1).
• Connect the pump to the Smart Control Receiver.
NOTE: If connecting a previous generation of the Adjustable Flow Pump,
please use the included Conversion Plug (Ex. 2).
PAIRING PROCEDURE
• Plug the Smart Control Receiver into an outdoor rated GFCI, and the unit
will automatically enter pairing mode (Ex. 1).
Ex. 1
NOTE: The blinking blue light on the face of the unit indicates the receiver
is in pairing mode and ready to be connected.
• Download the Aquascape Smart Control App (available on iOS or
Android App Store).
P R O F E S S I O N A L G R A D E / C L A S S E P R O F E S S I O N N E L L E
3
1
2
Ex. 2
I N S T R U C T I O N S
• Open the Aquascape Smart Control App and click 'Create New Account'.
NOTE: If you already have an account,
login with your username and password.
• Once logged in, click the three dashes in
the upper right-hand corner of the home
screen (Ex. 3).
• Click 'Add New Device' (Ex. 4).
NOTE: Adequate Wi-Fi coverage is
required (2.4 GHz networks supported).
• Continue to follow on-screen instructions
to complete the pairing process.
• To reset the device to factory defaults, first turn unplug and plug the
unit in. Next make sure the unit is off by pressing the power button and
confirming nothing is on the LCD screen, then press and hold the + and
- buttons for four seconds and release when the LCD display lights up
completely showing 8888 (Ex. 5).
• The receiver includes a switch that allows the pump to be operated in the
two following modes (Ex. 6).
Ex. 5
Position 1 - Operated by Aquascape Smart Control App or remote
O
control
–
Position 2 - Bypass control, and operate at full flow-rate
• In the event of a power loss the pump will revert to the last flow-rate setting.
Troubleshooting
• Device won't pair
– Make sure the outlet is receiving power
– Make sure you have adequate wireless coverage to connect the
device (2.4 GHz networks supported)
– Reset your wireless router
– Reset the device to factory defaults
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped
• Receiver displays an E1 message
– This means the input voltage going to the receiver is greater than
142 volts. Have an electrician inspect the outlet you have the receiver
plugged into
• Receiver displays an E2 message
– Receiver is overheating - make sure the receiver is in a shady or cooler
area away from direct, intense sunlight
Warranty Information
3 YEAR WARRANTY
Aquascape warrants that the Smart Control Receiver will be free of
manufacturing defects for three years after date of purchase. Proof of
purchase required. Warranty does not cover damage resulting from electrical
supply problems, improper wiring, lightning, negligent handling, misuse, or
lack of reasonable maintenance or care. If upon Aquascape's inspection, the
receiver shows evidence of a manufacturing defect, Aquascape's liability is
limited, at Aquascape's option, to the repair of the defect, or the replacement
of the defective product or refund of the original purchase price. The
warranty excludes costs of labor, removal of product, shipping and expenses
related to the installation and re-installation of the product. No liability for loss
or damage of any nature or kind, whether arising out of or from the use of the
product, whether defective or not defective, is assumed by Aquascape, Inc.
or its affiliates. Aquascape shall not be liable for any incidental, consequential
or other damages arising under any theory of law whatsoever.
Ex. 3
Ex. 4
Ex. 6