Aquascape Pro 7500 Instrukcja instalacji i konserwacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Pompa wodna Aquascape Pro 7500. Aquascape Pro 7500 16 stron.

7500 Pump

Installation & Maintenance Instructions

WArNING!

electrical Connections

Pumps must be used in a circuit protected by a ground fault interrupter.

All model pumps and control panels must be properly grounded per the national electrical

code or canadian electric code, state, province and local codes. Improper grounding voids

warranty. DO NOT USE THE POWER CABLE TO LIFT PUMP!

WArNING!

Products Returned Must Be Cleaned, Sanitized, Or Decontaminated As Necessary Prior To

Shipment. To Insure That Employees Will Not Be Exposed To Health Hazards In Handling Said

Material. All Applicable Laws And Regulations Shall Apply.

1) Getting to Know Your 7500 Pump

Flow Rate @ 5ft. Head

Watts

Volts

Shut-off Height

Discharge

Cable length

Max Amps

Horsepower

* Operating watts based on 5' total dynamic head.

) Installation Suggestions

• Do not wear loose clothing that may become entangled in the impeller or other moving parts.

• Only qualified personnel should install, operate and repair pump.

• Keep clear of suction and discharge openings. DO NOT insert fingers in pump with

power connected.

Professional Grade Products

6,700 gph

1200*

120

42 ft.

2" female

20 ft.

1/2

Performance Curve

7500 Pump

Flow (GPH)