Aquascape Pro 7500 Manual de instruções de instalação e manutenção - Página 2
Procurar online ou descarregar pdf Manual de instruções de instalação e manutenção para Bomba de água Aquascape Pro 7500. Aquascape Pro 7500 16 páginas.
Imprimir página7500 Pump
Installation & Maintenance Instructions
WArNING!
electrical Connections
Pumps must be used in a circuit protected by a ground fault interrupter.
All model pumps and control panels must be properly grounded per the national electrical
code or canadian electric code, state, province and local codes. Improper grounding voids
warranty. DO NOT USE THE POWER CABLE TO LIFT PUMP!
WArNING!
Products Returned Must Be Cleaned, Sanitized, Or Decontaminated As Necessary Prior To
Shipment. To Insure That Employees Will Not Be Exposed To Health Hazards In Handling Said
Material. All Applicable Laws And Regulations Shall Apply.
1) Getting to Know Your 7500 Pump
Flow Rate @ 5ft. Head
Watts
Volts
Shut-off Height
Discharge
Cable length
Max Amps
Horsepower
* Operating watts based on 5' total dynamic head.
) Installation Suggestions
• Do not wear loose clothing that may become entangled in the impeller or other moving parts.
• Only qualified personnel should install, operate and repair pump.
• Keep clear of suction and discharge openings. DO NOT insert fingers in pump with
power connected.
Professional Grade Products
Professional Grade Products
6,700 gph
1200*
120
42 ft.
2" female
20 ft.
10
1/2
Performance Curve
7500 Pump
Flow (GPH)