Panasonic WV-NP502 Instrukcja instalacji - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-NP502. Panasonic WV-NP502 32 stron. Ip video cameras
Również dla Panasonic WV-NP502: Tabela porównawcza (6 strony), Uwaga dotycząca integracji (8 strony)
Drukuj stronę
Camera mounting
The camera is mounted on the camera mount bracket (option) and the safety wire is secured.
Important:
• The installation area shall be strong enough to hold the camera and camera mount bracket
(option).
• The camera mount bracket (option) shall be mounted on the foundation part of the construc-
tion or a part with adequate strength.
• To prevent the mounting strength from becoming lower, do not use wooden screws to secure
the camera mount bracket (option).
z
Secure the camera mount bracket (option) to an installation position, and mount the camera on
the camera mount bracket.
Prepare mounting screws according to the material of the area where the camera mount brack-
et (option) is to be installed. The installation method may be different depending on the material
of the area where the bracket is to be installed.
• When installing on steel: Fix with bolts and nuts (M6 or M8)
• When installing on concrete: Fix with anchor bolts (M6 or M8)
The mounting conditions of the camera mount bracket are described as follows:
Installation
position
On ceiling
On wall
Important:
• When the camera mount bracket is mount-
ed on a wall, be sure to observe the
mounting height described on the illustra-
tion.
20
Applicable
Recommended
mount bracket
screw
WV-7010A
M6 or M8
WV-831
M8
Screw
Minimum pull-out
quantity
strength (per 1 pc.)
3 pieces
196 N
4 pieces
921 N
Floor
2 m 70 cm
or more