Panasonic WV-SC385 Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-SC385. Panasonic WV-SC385 36 stron. Ip video cameras
Również dla Panasonic WV-SC385: Specyfikacje (2 strony), Instrukcja instalacji (40 strony), Tabela porównawcza (6 strony), Instrukcja instalacji (40 strony), Instrukcja instalacji (40 strony), Uwaga dotycząca integracji (8 strony)

Rear view

12 V DC power supply terminal

About the [INITIAL SET] button

After turning off the power of the camera, turn on the power of the camera while holding down this button, and wait for

around 5 seconds or more without releasing this button. Wait around 3 minute after releasing the button. The camera will

start up and the settings including the network settings will be initialized. Before initializing the settings, it is recommended

to write down the settings in advance. Note that the preset position settings and the CRT key (SSL encryption key) used

for the HTTPS protocol will not be initialized.

Important:

• Use this hole only when the camera is to be installed on desktop using a tripod.

• Do not use this hole to mount on the ceiling since the fall prevention measure is unavailable.

Access indicator

(blinking at accessing)

10BASE-T/

Link indicator

100BASE-TX

LINK

(lighting at linking)

Network connector

INITIAL SET button

Cable guide

Audio output connector

POWER

ACT

INITIAL

EXT I/O

AUDIO OUT

MIC/LINE IN

MONITOR OUT

SET

12V IN

4 3 2 1

Screw hole for a tripod

(1/4-20 UNC for tripod)

Monitor out connector

for adjustment

Safety wire holder

Microphone/line input connector

External I/O terminals