I Inside the dome cover
q Monitor out connector (for adjustment)
(RCA jack) [MONITOR]
This connector is provided only for
checking the adjustment the angular field
of view or the focus on the video monitor
when installing the camera or when serv-
icing. ( page 22)
w Indicators ON/OFF switch [LED]
Select "ON" or "OFF" to determine
whether or not to activate the link indica-
tor and the access indicator.
Important:
Select "ON" (default) for normal use.
When "ON" is selected, it is possible to
turn on/off this switch using a PC via a
network.
When it is necessary to turn off the indi-
cators, turn off the indicators using a PC
via a network (by selecting "OFF" for
"Link/Access LED" of "Basic Setup" on
the setup menu).
(Refer to the setup instructions (PDF) for
further information.)
e LEDs (Indicators)
The LEDs will light/blink according to the
status of the camera as follows.
Access indicator (green):
Blinks when the camera is accessed.
Link indicator (orange):
Lights when the communication with
a network is established.
SD memory card error indicator/Focus
assist indicator (red):
Lights in the following cases.
When images cannot be stored on
the SD memory card,
When the focus assist function is
started,
When BEST FOCUS is displayed.
r SD memory card slot [SD]
Insert an SD memory card. ( page 29)
t Focus assist (F.A.) button
Activates the focus assist function.
( page 27)
14
y Focus ring
Use this ring to adjust the focus.
( page 27)
u Zoom ring
Use this ring to adjust the angular field of
view. ( page 27)
i Tilting table
Rotate this table to adjust the tilting angle
of the camera. ( page 26)
o Image tilt adjustment ring
Use this ring to correct image tilt.
( page 26)
!0 Panning table fixing screw [LOCK]
Fix the panning table with this screw after
adjusting the panning angle of the cam-
era. ( page 26)
!1 Panning table
Rotate this table to adjust the panning
angle of the camera. ( page 26)
I Dome cover
Protect the camera head with this dome
cover.
!2 Upper cover
( pages 20 - 21)
!3 Smoke dome
Remove the cover film from the dome
cover after the installation is complete.
Do not touch the dome cover by hand
directly after removing the cover film.
Drukuj stronę