Panasonic WVNF302 - NETWORK CAMERA Instrukcja instalacji - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WVNF302 - NETWORK CAMERA. Panasonic WVNF302 - NETWORK CAMERA 36 stron. Ip video cameras
Również dla Panasonic WVNF302 - NETWORK CAMERA: Broszura (2 strony), Instrukcja obsługi (20 strony), Odniesienie (2 strony), Tabela porównawcza (6 strony), Uwaga dotycząca integracji (8 strony), Instrukcja obsługi (20 strony)

Step 1

Start the Panasonic IP setting software.

Step 2

Click the [IP setting] button after selecting

the MAC address/IP address of the camera

to be configured.

Note:

When using a DHCP server, the IP

address assigned to the camera can be

displayed by clicking the [Refresh] but-

ton of the IP setting software.

Step 3

Complete each network setup item and click

the [Apply] button.

Note:

When using a DHCP server, it is possible

to set "DNS" to "Auto".

Important:

• It may take around 30 seconds to com-

pletely upload the settings of the camera

after clicking the [Apply] button. The set-

tings may be invalidated when the 12 V

DC power supply is cut or when the LAN

cable is disconnected before completing

the upload. In this case, configure the

settings again.

• When using a firewall (including soft-

ware), allow access to all UDP ports.