Panasonic WVNF302 - NETWORK CAMERA Manuel d'installation - Page 31

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Panasonic WVNF302 - NETWORK CAMERA. Panasonic WVNF302 - NETWORK CAMERA 36 pages. Ip video cameras
Également pour Panasonic WVNF302 - NETWORK CAMERA : Brochure (2 pages), Manuel d'utilisation (20 pages), Référence (2 pages), Tableau de comparaison (6 pages), Note d'intégration (8 pages), Manuel d'utilisation (20 pages)

Imprimer la page

Panasonic WVNF302 - NETWORK CAMERA Manuel d'installation

Step 1

Start the Panasonic IP setting software.

Step 2

Click the [IP setting] button after selecting

the MAC address/IP address of the camera

to be configured.

Note:

When using a DHCP server, the IP

address assigned to the camera can be

displayed by clicking the [Refresh] but-

ton of the IP setting software.

Step 3

Complete each network setup item and click

the [Apply] button.

Note:

When using a DHCP server, it is possible

to set "DNS" to "Auto".

Important:

• It may take around 30 seconds to com-

pletely upload the settings of the camera

after clicking the [Apply] button. The set-

tings may be invalidated when the 12 V

DC power supply is cut or when the LAN

cable is disconnected before completing

the upload. In this case, configure the

settings again.

• When using a firewall (including soft-

ware), allow access to all UDP ports.