Panasonic WVNS954 - NETWORK CAMERA Instrukcja instalacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WVNS954 - NETWORK CAMERA. Panasonic WVNS954 - NETWORK CAMERA 31 stron. Ip video cameras
Również dla Panasonic WVNS954 - NETWORK CAMERA: Specyfikacje (2 strony), Instrukcja obsługi (21 strony), Broszura (2 strony), Odniesienie (2 strony), Odniesienie (2 strony), Uwaga dotycząca integracji (8 strony), Instrukcja obsługi (21 strony)

Step 4

Make 4 markings for fixing screw holes while holding

the base unit.

• When wiring through a hole in the ceiling, make a

hole after determining the position for a cable hole

in the ceiling.

Make markings

Step 5

Mount the base unit onto a ceiling.

• Prepare fixing screws (M4) according to the materi-

al of the place where the camera is to be installed.

• When not installing the camera yet, attach the pro-

vided contact protection sheet to prevent dust

adhesion.

Step 6

Insert a SD memory card into the SD memory card slot.

• Refer to page 23 for how to insert a SD memory

card.

Step 7

Attach the safety wire fixed with the camera body to the

base unit.

• After attaching the safety wire to the camera, pull

the safety wire and confirm that the ring at the end

of the safety wire is securely hooked on the safety

wire holder.

Fixing screws

(M4, procure locally)

Contact protection sheet

(provided)

• When the provided contact protection sheet is still

on the camera, remove it before attaching the safe-

ty wire.

Loop of the

safety wire

end

Important:

The safety wire is designed to support weight of

the camera. Do not load more than the weight of

the camera.

Step 8

Attach the camera body to the base unit.

• Fit the camera body onto the base unit, and rotate

the camera clockwise as shown in the illustration.

Camera

Rotate

Base unit