Panasonic WVNS954 - NETWORK CAMERA Instrukcja instalacji - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WVNS954 - NETWORK CAMERA. Panasonic WVNS954 - NETWORK CAMERA 31 stron. Ip video cameras
Również dla Panasonic WVNS954 - NETWORK CAMERA: Specyfikacje (2 strony), Instrukcja obsługi (21 strony), Broszura (2 strony), Odniesienie (2 strony), Odniesienie (2 strony), Uwaga dotycząca integracji (8 strony), Instrukcja obsługi (21 strony)

Drukuj stronę

Panasonic WVNS954 - NETWORK CAMERA Instrukcja instalacji

Step 9

Fix the camera onto the base unit using the removed

screw in step 1.

Step 10

Check if the installation has been made successfully.

• Check the following.

The camera is firmly installed, not installed tilted.

The camera is firmly installed, not installed loose.

The fixed part of the camera cannot be rotated

even when trying to rotate it.

Step 11

Connect the cables.

• Refer to page 20 for how to connect the cables.

Step 12

Separate the provided decorative cover into 2 pieces.

• Release the stoppers by pressing the [*] parts of

the decorative cover as shown in the illustration.

* Direction of the pressing force (b) is indicated on

the side of the decorative cover.

Rear view

Release the stoppers

Hold one of 2 pieces securely

and disengage them.

Important:

When pressing to the reverse direction, it may

damage the decorative cover.

Hold one of 2 pieces

securely and

disengage them.

Push

Step 13

Attach the decorative cover to the camera.

• Position the pieces of the decorative cover that

have been split in step 12 to tuck down the camera

body, and then attach them together.

Fit up the stoppers as shown in the illustration.

Hold one of 2 pieces securely

and engage them.

Rear view

Hook the

stoppers

Step 14

Fix the decorative cover.

• When pulling out the cables from the hole in the

ceiling, press the decorative cover to the ceiling

with force.

• When pulling out the cables from the side of the

decorative cover, press the decorative cover to the

ceiling with force while aligning the cables to the

fabricated cable hole of the decorative cover.

[When wiring through a hole in a ceiling]

[When wiring through the wiring hole of the decorative

cover]

Attach the fabricated parts

Push