HP 316095-B21 - StorageWorks Edge Switch 2/24 Uwaga dotycząca wydania - Strona 21

Przeglądaj online lub pobierz pdf Uwaga dotycząca wydania dla Przełącznik HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 23 stron. Edge switch release notes
Również dla HP 316095-B21 - StorageWorks Edge Switch 2/24: Aktualizacja instrukcji (9 strony), Podręcznik (41 strony), Podręcznik (40 strony), Uwaga dotycząca wydania (32 strony), Uwaga dotycząca wydania (27 strony), Podręcznik (26 strony), Uwaga dotycząca wydania (27 strony), Uwaga dotycząca wydania (25 strony), Instrukcja instalacji (24 strony), Uwaga dotycząca wydania (23 strony), Uwaga dotycząca wydania (22 strony), Uwaga dotycząca wydania (23 strony), Uwaga dotycząca wydania (19 strony), Uwaga dotycząca wydania (19 strony), Uwaga dotycząca wydania (18 strony), Instrukcja obsługi (17 strony), Uwaga dotycząca wydania (17 strony), Instrukcje aktualizacji (16 strony), Instrukcja obsługi (16 strony), Instrukcja instalacji (16 strony), Uwaga dotycząca wydania (16 strony), Uwaga dotycząca wydania (17 strony), Uwaga dotycząca wydania (17 strony), Uwaga dotycząca wydania (11 strony)

Workaround

When a switch has been added to HAFM for management, or firmware has been

upgraded, observe the switch being shown as discovered by HAFM. Check the

event log of the switch to ensure there were no faults that occurred during the

short time when HAFM was in the process of discovering the switch.

Sort by domain ID in HAFM product list is incorrect

If sorting by the Domain ID is selected in the HAFM Product List, the products

are sorted by domain ID, but the list is sorted alphabetically instead of

numerically. For example, sorting by ascending domain ID results in the order 1,

11, 13, 2, 23, 3, 6, 7, instead of 1, 2, 3, 6, 7, 11, 13, 23.

Non-M-series switches in fabrics may cause errors if they are the principal switch

If a non-M-Series switch or director is installed in the fabric, and it is the principle

switch, it is not recognized by HAFM and thus cannot be managed by HAFM. An

icon is not displayed for the switch in the fabric topology view or device list and

you are not able to launch an Element Manager. Fabric names do always match

the principle switch, and unpredictable results occur with persisted fabrics if an

M-Series switch is not the principle switch, or if a switch is added that assumes

the principal switch role.

When the principal switch is a non-M-Series switch and the fabric is persisted,

incorrect persistent fabric updates occur if the connection to the principal switch is

lost. The persistent fabric also fails if a principal switch is added to a M-Series

fabric.

Workaround

An M-Series director or edge switch should be configured to be the principal

switch in all M-Series fabrics being managed with HAFM.

New sound files are not added to Event Manager immediately

New sound files do not display in the pull down menu of the Event Manager. They

cannot be selected for inclusion in a rule. In order for the new sound files to be

available, HAFM services must be stopped and restarted, or the HAFM appliance

must be rebooted. This is not disruptive to managed switches, but monitoring and

logging functions are interrupted while the appliance is rebooting.

HP StorageWorks HA-Fabric Manager release notes

About this document