HP ProCurve 1600M Instrukcja instalacji - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik HP ProCurve 1600M. HP ProCurve 1600M 36 stron. Redundant power supply
Również dla HP ProCurve 1600M: Arkusz specyfikacji (12 strony), Przeczytaj mnie najpierw (8 strony), Podręcznik recenzenta (27 strony), Podręcznik uzupełniający (2 strony), Podręcznik uzupełniający (2 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (28 strony), Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (4 strony), Podręcznik użytkownika (8 strony), Suplement do podręcznika (28 strony), Przeczytaj mnie najpierw (16 strony), Instalacja i demontaż (2 strony), Instrukcja instalacji (12 strony), Podręcznik planowania i wdrażania (40 strony), Instrukcje demontażu produktu po zakończeniu eksploatacji (2 strony), Instrukcja instalacji (46 strony), Podręcznik diagnostyki (2 strony), Instrukcje demontażu (2 strony)

HP ProCurve 1600M Instrukcja instalacji

Troubleshooting

16
Troubleshooting
The primary tools for troubleshooting the switch modules are the LEDs on the
front of the switch and on the modules. Refer to "LED Behavior" on page 8.
Also, refer to the Installation and Getting Started Guide for more detailed
troubleshooting information.
The following tables describe switch and module LED displays that indicate
that the module or connections to the ports on the module are not operating
correctly.

Switch and Module LED Error Indicators:

Fault
Self Test
Flashing
Flashing
Flashing
Flashing
Off
Off
Flashing
Flashing
Off
Off
Off
Off
The flashing behavior is an on/off cycle once every 1.6 seconds, approximately.
††
The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.

Diagnostic Tips:

See the tables on the next two pages to diagnose the LED error indicators in
the previous table.
Module Status
Flashing
Flashing
On briefly, then
Flashing
Flashing
Off
Fast Flashing
On
Off with cable
connected
Port Link
Diagnostic Tips
Never On
Off
Off
Flashing
††