Diamond Way K-Kub Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna podłogowa Diamond Way K-Kub. Diamond Way K-Kub 7 stron. Single phase floor grinder

Introduction and Description

This manual is intended to provide operation and service information required

for the safe and efficient use of the K-Kub Floor Grinder.

Operating or servicing the unit other than in accordance with the instruction

given in the manual may result in subjecting the machine to conditions beyond

its capability, which may result in the failure of the machine or personal injury

to the operator.

IMPORTANT:

• Read the operating manual and warranty conditions given before

attempting to operate the floor grinder. Special attention must be

given to the section entitled "Safety Precautions."

The K-Kub Floor Grinder is a sturdy, reliable and easy to use machine.

The K-Kub Floor Grinder is fitted with 2.2kW single phase motor. This motor

offers direct drive to the grinding plate with the incorporation of a flexible

coupling between the motor and the plate.

The K-Kub shroud system is unique in design, automatically adjusting to suit

segment height and floor angle. This shroud system when used in conjunction

with an appropriate industrial vacuum unit eliminates dust loss during

grinding. The shroud has 2 removable sections to enable the operator to grind

close up to the wall etc. Please note dust loss is possible when this section is

removed.

The K-Kub comes complete with a water connection for wet grinding should

this be required. There is also a ball valve which allows the operator to

regulate the water supply to obtain the best grinding results.

The K-Kub has a foldable handle which makes it easily transportable in any

small vehicle. The rear wheels can be extended outwards should the operator

require more stability from the grinder. This requires the use of an 8mm Allen

key. The operator can also raise and lower the height of the handle to

maximise their comfort during their use of the grinder.

3 |

P a g e