Panasonic SA-HC7 Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Panasonic SA-HC7. Panasonic SA-HC7 32 stron. Compact stereo system model no. sc-hc7

Drukuj stronę

Connecting to network

Checking the computer name of your computer

While importing music data or backing up/restoring recording

data, entering PC name will be requested in the procedure.

Confirm your computer's PC name and enter the exactly same

name on this unit.

e.g.) Windows Vista

1. "

(Start)"

➾

Select "Control Panel".

2. Select "System".

3. Conﬁ rm the characters for "Full computer name" on the

item "Computer name, domain and workgroup settings" and

take a note.

e.g.) Windows XP Home Edition

1. "Start"

➾

Select "Control Panel".

2. Select "System".

3. Conﬁ rm the characters for "Full computer name" item on

"Computer Name" tab and take a note.

Checking and setting the shared folder

You need to set the shared folder on the computer to import

music data or back up/restore recording data.

e.g.) Windows Vista

1. Right-click the folder to make the sharing setting.

"Properties".

2. Select "Sharing" tab.

you are requested to enter or conﬁ rm the administrator

password, enter the password or provide conﬁ rmation

information.)

➾

Add the check mark for "Share this folder."

(Take a note of the characters for "Share name".)

3. Select "Permissions".

"Full Control".

➾

4. Select "OK".

• Checking the Share Permissions level (only for backing

up/restoring data)

If the Share Permissions level is "Reader", backing up/

restoring recording data is not possible.

1. Right-click the share folder.

2. If the Share Permissions level for the user or group is

"Reader", click " " and select an item other than "Reader"

3. Select "Share".

Restore to the original setting after backing up/restoring

recording data is complete.

e.g.) Windows XP Home Edition

1. Right-click the folder to make the sharing setting.

"Sharing and Security".

2. Add the check marks for "Share this folder on the network"

and "Allow network users to change my ﬁ les". (Take a note

of the characters for "Share name".)

3. Select "OK".

➾

Select "Advanced Sharing". (If

➾

Add the check mark for "Allow" of

Select "OK".

Select "Share".

➾

Connect this unit directly to the computer

To import

(➡

page 22) data, you can also connect this unit directly to the

computer with the LAN cross cable. In this case, you need to

change the settings on this unit and computer.

To LAN (over 100BASE-T) terminal

Settings on this unit

Set each item as below on the setting menu "Setting the IP

address manually"

●

IP Address (setting example: 192.168.0.16)

Use a different IP address from the address on the

computer to connect.

●

Subnet Mask (setting example: 255.255.255.0)

255.255.255.0 is normally used.

●

Gateway

➾

Select

No need to set.

Settings on the computer

e.g.) Windows XP

1. Click "Control Panel"

"Properties" of "Local Area Connection" and then click

"Properties" of "Internet Protocol (TCP/IP)".

2. Select "Use the following IP address" and set the IP

address and Subnet mask as below.

●

IP Address (setting example: 192.168.0.15)

Use a different IP address from the address on this unit.

●

Subnet Mask (setting example: 255.255.255.0)

255.255.255.0 is normally used.

e.g.) Windows Vista

1. Click "Control Panel"

"Connection". Click "View status" for "Connection" menu

and click "Properties".

2. Select "Networking" tab, then select "Internet Protocol

Version 4 (TCP/ IPv4)" on "This connection uses the

following items" and click "Properties".

3. Select "Use the following IP address" and set the IP

➾

Select

address and Subnet mask as below.

●

IP Address (setting example: 192.168.0.15)

Use a different IP address from the address on this unit.

●

Subnet Mask (setting example: 255.255.255.0)

255.255.255.0 is normally used.

Note

If other values have already been set on this unit or computer,

●

we recommend taking a note of the contents so they can be

restored later.

●

Internet connection may be impossible when the above settings

are made on this unit and computer. Return each setting to the

original value when using Internet.

page 21), back up

(➡

page 22) or restore

LAN cross cable

(commercially available)

(➡

page 23).

➾

"Network Connections"

➾

"Network and Sharing Center"

This unit

To LAN terminal

➾