Axis Industries QALCOMATIC FLOW H Opis techniczny, instalacja i instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Opis techniczny, instalacja i instrukcja obsługi dla Przyrządy pomiarowe Axis Industries QALCOMATIC FLOW H. Axis Industries QALCOMATIC FLOW H 8 stron. Water meters
Drukuj stronęindication window is displayed.
3) reporting day of the last month
4) volume of water used before the reporting day of the last month
5) reporting day of the month before the last
Indicator "2" and the last but one day of the reporting date (month, day) are displayed. When the results of
6) volume of water used before the reporting day of the month before the last
7) annual reporting date
8) volume of water used before the annual reporting day
9) control number
10) flowrate
11) error code
12) error
13) error date
PLMATICF01
31/05/2016
Indicator "1" and the last day of the reporting date (month, day) are
displayed. When the results of the last reporting day data are
inaccessible, the display shows "1 --.---.---".
The volume of water used before the last reporting day is displayed.
When data are inaccessible, "00000.000" will appear on the display.
the last but one reporting day data are inaccessible, the display
shows "2 --.---.---".
The volume of water used before the last but one reporting day is
displayed. When data are inaccessible, "0.000" will appear on the
display.
Indicator "2" and the last but one day of the reporting date (month,
day, date) are displayed. When the results of the last but one
reporting day data are inaccessible, the display shows "2 --.---.---".
The volume of water used before the last but one reporting day is
displayed. When data are inaccessible, "0.000" will appear on the
display.
The control number comprises the value of the volume of water
used before the last reporting date and the device number. This
number is used to verify the correct reading of the value of the water
volume accumulated before the last reporting date
Flowrate is indicated in m
Negative flowrate readings are displayed with "–" symbol.
The example shows that the displayed flowrate value is 0.980 m
The readings of the error code are displayed only in the presence of
an error. Each digit corresponds to the possible cause of error.
Several codes of the errors that occurred simultaneously may be
displayed (See, Table 1).
Indicates the error in the meter operation. Displayed only in the
event of major failure of the water meter (codes 2, 3, 4 or F).
In the event of failure the meter must be replaced!
If a major failure occurs in the water meter, the error date will be
displayed.
The arrow on the display will indicate the current direction of the
flow. (if the arrow points to the right – positive flow, to the left –
3
/h.
3
/h.
7