Olympus BXC-FSU Instrukcja obsługi - Strona 38

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus BXC-FSU. Olympus BXC-FSU 41 stron. Modular microscope assemblies hardware

Phenomena

The nosepiece does not move.

Auto-focusing does not work.

Repair request

If you cannot improve the phenomena after taking the above remedies, please contact us for assistance.

At that time, please tell them the following information as well.

Product name and abbreviation (Example: BXC-CBB)

Product number

Phenomena

6. Troubleshooting

Cause

Wrong cable is used.

Wrong command is used.

The nosepiece setting to select

either the 6Position-NP or

5Position-NP on the DIP switch is

wrong.

Only a specific hole (partial

segment) is used.

The safety lock is not attached.

Remedy

Use a correct cable.

Refer to the command reference

manual.

Specify the correct nosepiece

setting on the DIP switch.

Refer to "To extend the life of the

nosepiece" and evenly apply the

grease.

Attach the short plug provided

with the product or a lock

mechanism.

Reference

page

—

6.3 Drive system