Olympus CH30 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus CH30. Olympus CH30 28 stron. Biological microscope
Również dla Olympus CH30: Instrukcja obsługi (29 strony)

Drukuj stronę

№

Fig. 3

Mounting the Eyepieces

(Fig. 3,4)

'Binocular Tube (CH3-B145), Monocular Tube (CH3-MO45)

1 , Remove the eyepiece dust cap © (Fig. 3)

2 . Insert the eyepiece

@ into the eyepiece sleeve as far as i t wil go.

ig. 3)

' 3 , Mount the other eyepiece in the same manner.

Eyepiece micrometer discs can be inserted into the NCWHK10X

eyepieces. Use 10 mm/100 micrometer discs

1 , Unscrew the micrometer mounting frame @ from the eyepiece

by turning counterclockwise.

2 , Place a micrometer disc into the frame, The engraving on the

micrometer disc should face downward into the micrometer

'mounting frame @. (Fig. 4)

3 . Screw the micrometer mounting frame back into the eyepiece

tube. (Fig. 4)

+ Use 19 mm diameter micrometer discs.

r - [ Using Eyepiece Mierometer Dises (optional)

| -

Mounting the Objectives

(Fig. 8)

Mount the objectives on the revalving nosepiece in such a manner

that the magnification increases from low to higher powers in a

counterclockwise direction.

Oi there are empty sockets with no objective mounted, make sure to

attach the provided dust plugs.

Mounting the Condenser

(Fig. 6)

1 . Tur the coarse acustment knob D to ris the stage tots highest

postion

2 . Tum the condenser height adjustment knob @ to lower the condenser

holder

to the position where the clamping screw @ can be turned

tightening the clamping screw @. Positioning the condenser with the

diaphragm lever @ at the front facilitates operation

4 , Turn the condenser height adjustment

knob @ to raise the condenser

holder to its highest position.