Olympus CH30 Petunjuk Manual - Halaman 8
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus CH30. Olympus CH30 28 halaman. Biological microscope
Juga untuk Olympus CH30: Petunjuk Manual (29 halaman)
![Olympus CH30 Petunjuk Manual](/uploads/products/server2/4282449/4282449.jpg)
№
Fig. 3
Mounting the Eyepieces
(Fig. 3,4)
'Binocular Tube (CH3-B145), Monocular Tube (CH3-MO45)
1 , Remove the eyepiece dust cap © (Fig. 3)
2 . Insert the eyepiece
@ into the eyepiece sleeve as far as i t wil go.
ig. 3)
' 3 , Mount the other eyepiece in the same manner.
Eyepiece micrometer discs can be inserted into the NCWHK10X
eyepieces. Use 10 mm/100 micrometer discs
1 , Unscrew the micrometer mounting frame @ from the eyepiece
by turning counterclockwise.
2 , Place a micrometer disc into the frame, The engraving on the
micrometer disc should face downward into the micrometer
'mounting frame @. (Fig. 4)
3 . Screw the micrometer mounting frame back into the eyepiece
tube. (Fig. 4)
+ Use 19 mm diameter micrometer discs.
r - [ Using Eyepiece Mierometer Dises (optional)
| -
Я
Mounting the Objectives
(Fig. 8)
Mount the objectives on the revalving nosepiece in such a manner
that the magnification increases from low to higher powers in a
counterclockwise direction.
Oi there are empty sockets with no objective mounted, make sure to
attach the provided dust plugs.
I
Mounting the Condenser
(Fig. 6)
1 . Tur the coarse acustment knob D to ris the stage tots highest
postion
2 . Tum the condenser height adjustment knob @ to lower the condenser
holder
to the position where the clamping screw @ can be turned
3 . Insert the condenser @ into the mounting hole © and clamp by
tightening the clamping screw @. Positioning the condenser with the
diaphragm lever @ at the front facilitates operation
4 , Turn the condenser height adjustment
knob @ to raise the condenser
holder to its highest position.