Olympus CHD Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus CHD. Olympus CHD 17 stron. Biological microscope
Również dla Olympus CHD: Instrukcja obsługi (16 strony)

Drukuj stronę

Adjustment of the Microscope Mirror

1) Install the microscope near the window or place a lamp stand

(I;

front of the microscope. (Fig. 9)

I-

<t:

CIl

Fig.9

2) Looking through the observation tube, adjust the mirror angle and

direction so that the field of

view

is evenly illuminated. (Fig. 10)

3) The flat surface of the mirror is usually employed, unless the objec-

tive

very

low power. However, if the field of

view

is not evenly il-

luminated, use the concave surface.

4) For observation with the available light from the window or from the

fluorescent lamp in the room,

remove

the blue filter from the con-

denser.

5) For observation with incandescent light, use the blue filter.

Fig. 10

Fig. 11

Fig. 12

Focus

1) Swing in the lOX objective.

2) Bring the specimen into focus by means of the focus adjustment

knobs.

Rotate the focus adjustment knobs clockwise (in the direction of

the arrow in Fig. 11), to raise the stage (or the specimen ap-

proaches to the objective), or

reverse

the knobs to lower the stage.

Interpupillary Distance Adjustment

(for the binocular

tube)

1) Looking through the binocular tube,

move

the knurled dovetail slides

(1,

in the directions of the arrows until a perfect binocular vision is

obtained. (Fig. 12)

2) If you memorize your interpupillary distance setting on the scale

provided on the dovetail slide

OJ,

it is convenient

obtain a proper

setting next time. (Fig. 12)

B - - - - - - - - - - - - - - - - - - - - - - - - - - - - -