Olympus U-FWR Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus U-FWR. Olympus U-FWR 12 stron. Transmitted light/reflected light/observation filter wheels

Drukuj stronę

VARIOUS MICROSCOPY PROCEDURES

· Using the BX2 software for PC (CD-ROM), control the filters from your PC. (automatic switching/programmed control)

· Perform required assignment to the buttons of the U-HSTR2 hand switch and control the filters from the hand switch.

ASSEMBLY

}When connection of all cables including that of the filter wheel have completed, bundle the cables using the cord clamps

provided with the BX-UCB so that they do not come in the way of operation.

Fig. 1

Inserting the Filters in the Filter Wheel

}With the U-FWT, the function of the U-UCD8A motorized condenser can

be extended by attaching the U-FWCO1.25X low-magnification correction

lens and U-FW32PO polarizer in addition to the filter wheel.

1. Loosen the 4 filter wheel cover clamping screws @ using the Allen screw-

driver provided with the microscope, then remove the cover.

}Filters with up to 32 mm diameter (25 mm filters can also be acceptable by

using conversion adapters*) and 6 mm thickness can be mounted on the

filter wheel. The orientation of each push ring should be determined ac-

cording to the filter thickness as shown in the table on the next page.

U-FWT/FWR/FWO

(Figs. 1 & 2)