Olympus U-FWR Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus U-FWR. Olympus U-FWR 12 stron. Transmitted light/reflected light/observation filter wheels

Drukuj stronę

Filter Thickness

· 4 mm or more

· U-FWCO1.25X

· U-FW32PO

· Below 4 mm

· Conversion adapter*

}The above procedures apply when a 25 mm filter is mounted on the conversion adapter.

Fig. 2

Push Ring Orientation

2. By inserting the push ring driver ² which is attached by magnetic absorp-

tion to the filter wheel into the slit ³ on the push ring, insert the ring

clockwise the clamp the filter |.

}When attaching a 25 mm filter on a conversion adapter, use the smaller

blade of the ring driver ².

To prevent flare, the filter insertion section of conversion adapters is tilted

by 5°. Take care of the tilting when attaching a filter.

}Barrier filters and excitation filters have arrow indexes on their side panels.

Barrier filter:

Excitation filter: Align the arrow with the opposite direction to the inser-

3. After inserting all the required filters, attach the cover @ in the original

position.

Notes

· Mount the U-FWCO1.25X so that the side with 29.6 mm

diameter faces downward.

· Be sure to mount the U-FW32PO in hole No.1.

(While aligning the indexes with each other, align the

positioning pin with the groove.)

* Six conversion adapters are provided for each of U-

FWR/FWO.

Align the arrow with the insertion direction.

tion direction.