Olympus ARROW POINTER Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus ARROW POINTER. Olympus ARROW POINTER 20 stron. Arrow pointer

PROPER SELECTION OF THE POWER SUPPLY CORD

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to " Specifications " and

" Certified Cord " below:

CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the

electrical safety of the equipment.

Voltage Rating

Current Rating

Temperature Rating

Length

Fittings Configuration

A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with an

agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of agencies listed in

Table 1. In case you are unable to buy locally in your country the power supply cord which is approved by one of the

agencies mentioned in Table 1, please use replacements approved by any other equivalent and authorized agencies in

your country.

Specifications

125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)

6A minimum

60°C minimum

3.05 m maximum

Grounding type attachment plug cap. Opposite terminates in molded-on IEC con-

figuration appliance coupling.

Table 1 Certified Cord

U-APT