Olympus U-LLGAD Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus U-LLGAD. Olympus U-LLGAD 20 stron. Light guide illumination system

Olympus U-LLGAD Instrukcja obsługi
1
Fig. 10
1
Fig. 11
Operation
Immediately after the power switch is turned ON.
When the lamp is in stand-by status (3 seconds after the
power switch is turned ON).
When the lamp is turned OFF (when the lamp switch is
pressed for a period of time). (approx. 0.5 seconds)
When end of the lifetime of the lamp is coming closer.
When the display is disabled by abnormal EEPROM data. Err is displayed.
1
Fig. 12
Conditions of the lamp
When the lamp is in stand-by status.
When the lamp switch is pressed and the lamp is turned ON properly.
Though the lamp switch is pressed, the lamp is not turned ON.
When the lamp is turned off.
When the lamp switch is pressed for a period of time (approx. 0.5 seconds)
within 2 minutes after the lamp was turned on
When the lamp is turned off abnormally while the lamp is being turned on. It lights red.
When the temperature of the body is raised abnormally due to the
deterioration of cooling status.

Adjustment of the brightness

3
1
Rotate the light volume adjustment dial to adjust the light volume. The
light volume can be adjusted in 7 levels. Each numerical number
indicates the percentage (0—100%) of each light volume where the
maximum light volume is 100%.
? Rotate the light volume adjustment dial slowly by each level.
Counter Display
4
1
When the power switch is turned ON, the accumulated lighting time
of the lamp appears in the counter. For details, refer to below table.
The software version appears. (for 3 seconds)
The accumulated lighting time of the lamp appears. (Unit: 1 hour)
The countdown of the cooling time (300 seconds) appears. (Unit:
1 second)
When the accumulated lighting time of the lamp exceeds 1900
hours, it blinks every second while the lamp is being turned on.

Lighting Display LED

5
1
The lamp status appears in the lighting display LED. For details, refer
to below table.
It is turned off.
It lights blue.
It lights red.
It is turned off.
It lights blue and blinks. (The light display LED is
turned off, when the light is turned off 2 minutes
after it was turned on.)
It lights red.
U-HGLGPS
Counter display
Lighting display LED
(Fig. 10)
(Fig. 11)
(Fig. 12)
7