Olympus U-LLGAD Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus U-LLGAD. Olympus U-LLGAD 20 stron. Light guide illumination system

Drukuj stronę

Fig. 4

* Shapes of the power cord's plugs and

power outlets are different by country.

Fig. 5

Mounting the Power Cord

Insert the power cord to the socket on the back side of the light

source unit.

Insert the power cord plug to the wall mounted outlet.

• Cords and liquid light guide are vulnerable when bent or twisted.

CAUTION

Never subject them to excessive force.

• Make sure that the main switch is set to \ (OFF) before

connecting the power cord and other cords.

• Always use the power cord provided by Olympus. If no power

cord is provided, please select a proper power cord by referring

to "PROPER SELECTION OF THE POWER CORD" at the end of

this instruction manual.

• Connect the power cord correctly and ensure that the ground

terminals of the power cord and the wall outlet are properly

connected. If the equipment is not grounded, Olympus cannot

warrant the electrical safety and performance of the system.

U-HGLGPS

(Figs. 4 & 5)