Olympus U-LLGAD Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus U-LLGAD. Olympus U-LLGAD 20 stron. Light guide illumination system

Drukuj stronę

PROPER SELECTION OF THE POWER CORD

If no power cord is provided, please select the proper power cord for the equipment by referring to " Specifications " and " Certified Cord " below:

CAUTION: In case you use a non-approved power cord for Olympus products, Olympus can no longer warrant the electrical

safety of the equipment.

Voltage rating

Current rating

Temperature rating

Length

Fittings configuration

A power cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with an agency

marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of agencies listed in Table 1. In

case you are unable to buy locally the power cord which is approved by one of the agencies mentioned in Table 1, please

use replacements approved by any other equivalent and authorized agencies in your country.

Country

Argentina

IRAM

Australia

SAA

Austria

ÖVE

Belgium

CEBEC

Canada

CSA

Denmark

DEMKO

Finland

FEI

France

UTE

Germany

VDE

Ireland

NSAI

Specifications

125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)

6A minimum

60˚C minimum

3.05 m maximum

Grounding type attachment plug cap. Opposite terminates in molded-on IEC con-

figuration appliance coupling.

Table 1 Certified Cord

Certification

Agency

Mark

Country

Agency

Italy

IMQ

JET, JQA, TÜV,

Japan

UL Japan/METI

Netherlands

KEMA

Norway

NEMKO

Spain

AEE

Sweden

SEMKO

Switzerland

SEV

United

ASTA

Kingdom

BSI

U.S.A.

U-HGLGPS

Certification

Mark