Olympus U-UCD8A Instrukcja obsługi - Strona 36

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus U-UCD8A. Olympus U-UCD8A 40 stron. Motorized universal condenser

Drukuj stronę

Fig. 11

When the mounting position is 5, 6 or 7:

}To clamp the DIC prism, do not use the built-in optical ele-

ment centering screw but use the provided Allen wrench ²

which is designed exclusively for this purpose.

1. Engage the position to be used in the light path by motorized

operation, loosen the position clamping screw by inserting the

Allen wrench ² from the rear of the condenser, then remove

the dummy optical element.

# Do not turn the turret while the clamping screw is loose.

Otherwise, the clamping screw may interfere with other

part.

2. Drop in the DIC prism by aligning its positioning pin with the

slot, then tighten the screw using the Allen wrench. Then

attach the index plate.

When all of the required optical elements have been mounted,

place the turret cover in the original position.