AlphaESS SMILE-G3-EVCT11 Instrukcja instalacji, obsługi i konserwacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Ładowarka AlphaESS SMILE-G3-EVCT11. AlphaESS SMILE-G3-EVCT11 14 stron.
Drukuj stronęMOUNTING
2.3 AC Charger Mounting
2.3.1 Mounting the EV Charger
The steps to mount the AC Charger are listed below:
1. Find a flat space on the wall.
2. Use the wall bracket to mark 4 points on the wall.
3. Drill 4 holes with an 8mm diameter drill bit and insert the 4 M6*40 expansion pipes
horizontally into the holes. Make sure the screws are fully inserted and the holes are
around 40mm deep.
05
06
4. Secure the wall bracket to the wall with 4 M6x40 screws. (The EV Charger shall be
mounted vertically.)
5. Hang the EV charger on the wall bracket.
6. Secure the EV charger with 2 M4*10 screws and complete the installation.
MOUNTING