AlphaESS SMILE-G3-EVCT11 설치, 운영 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} AlphaESS SMILE-G3-EVCT11에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AlphaESS SMILE-G3-EVCT11 14 페이지.

MOUNTING

2.3 AC Charger Mounting

2.3.1 Mounting the EV Charger

The steps to mount the AC Charger are listed below:

1. Find a ﬂat space on the wall.

2. Use the wall bracket to mark 4 points on the wall.

3. Drill 4 holes with an 8mm diameter drill bit and insert the 4 M6*40 expansion pipes

horizontally into the holes. Make sure the screws are fully inserted and the holes are

around 40mm deep.

4. Secure the wall bracket to the wall with 4 M6x40 screws. (The EV Charger shall be

mounted vertically.)

5. Hang the EV charger on the wall bracket.

6. Secure the EV charger with 2 M4*10 screws and complete the installation.

MOUNTING