Arbutus Medical DCB127 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt medyczny Arbutus Medical DCB127. Arbutus Medical DCB127 18 stron.

4.2. Prepare the Drill

Nonsterile Team Member

1. Install a charged battery and conﬁrm that

the drill is functioning by pressing the

trigger and observing if it turns ON. If the

drill is not functioning, do not proceed to

the next step. Try re-charging the battery

again or use a diﬀerent charged battery.

If the drill still does not operate, contact

Arbutus Medical.

2. You may terminate operation of the drill by

releasing the trigger.

3. Ensure toggle switch is set to forward, not

reverse.

4. Set the torque to "MAX"

A torque setting less than 'MAX' may be

insufficient for drilling.

4.3. Prepare Sterile Cover

Sterile Team Member

1. Hold Cover and keep it suspended in air.

2. Roll the Cover edge back. Only expose the

inside lining of the Cover to the non-sterile

team member.

3. Hold the Cover so that your sterile gloves

are tucked under the folded fabric cuﬀ and

protected by the fold.

Arbutus Medical