ABB i-bus 6164 U-500 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler ABB i-bus 6164 U-500. ABB i-bus 6164 U-500 11 stron. Eib heating actuator

Mounting

• Switch off the 230-V mains supply!

• In the event the connecting leads have to be exten-

ded:

– Run these leads (max. 2.5 mm

section) into the interior of the mounting enclosure

to be used (eg. flush-mounted double box).

– Connect these leads to the screwless box

terminals provided for this purpose.

• Hook up the connecting lines of the unit as shown

in the wiring diagram (Fig. 2).

• Unless done earlier, assign the physical address

(see Commissioning).

• Complete mounting work:

The 230-V mains supply must be disconnected!

A special fastening arrangement or mounting

position of the unit is not required.

Place the unit into the mounting box and close off

boxe(s).

conductor cross