ABB i-bus 6164 U-500 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler ABB i-bus 6164 U-500. ABB i-bus 6164 U-500 11 stron. Eib heating actuator

Commissioning

The relevant application versions available with

pertinent parameters can be seen from the current

Technical Manual of the ABB i-bus

• Connect a PC with EIBA Tool Software (ETS2 V1.1) to

the EIB via an RS232 interface.

• Switch on the power supply to the EIB bus line.

• Assign a physical address.

Do not use pointed or sharp-edged objects when

pressing the programming key because this might

damage the flexible cover over the key opening!

– Press the programming key;

the red programming LED will become illuminated.

– After the physical address has been programmed,

the red LED will go out.

– Write the number of the physical address on

your device using a smudge-proof pencil.

• Select and parameterize the application.

• Assign the group address(es).

• Cut in the 230-V power supply.

EIB.