ARCCAPTAIN CUT50 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System spawania ARCCAPTAIN CUT50. ARCCAPTAIN CUT50 20 stron. Plasma cutter 50a

3.2 Strap Installation

Step 1: Separate the velcro.(See Pic 9)
Step 2: Pull out one side through the
strap hole on the front panel with hook
side of the velcro up.(See Pic 10)
Step 3: Pull out it to well stick hook side
of the velcro to loop side and across
the nylon buckle.
Repeat it on the other side.(See Pic 11)
Step 4: Adjust the length by pulling the
nylon buckle (as shown in the
picture).(See Pic 12)
Step 5: Proper state after installation:
1. Strap does not twist;
2. Buckle side of shoulder pad is up,
while its flat side faces the machine (as
shown in the picture);
3. Straps are well locked.(See Pic 13)
Digital Welder Expert, Know You More
Pic 9
Pic 10
Pic 11
Pic 12
Pic 13
10
https://www.arccaptain.com