ARCCAPTAIN CUT50 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARCCAPTAIN CUT50. ARCCAPTAIN CUT50 20 pages. Plasma cutter 50a

Imprimer la page

3.2 Strap Installation

Step 1: Separate the velcro.(See Pic 9)

Step 2: Pull out one side through the

strap hole on the front panel with hook

side of the velcro up.(See Pic 10)

Step 3: Pull out it to well stick hook side

of the velcro to loop side and across

the nylon buckle.

Repeat it on the other side.(See Pic 11)

Step 4: Adjust the length by pulling the

nylon buckle (as shown in the

picture).(See Pic 12)

Step 5: Proper state after installation:

1. Strap does not twist;

2. Buckle side of shoulder pad is up,

while its flat side faces the machine (as

shown in the picture);

3. Straps are well locked.(See Pic 13)

Digital Welder Expert, Know You More

Pic 9

Pic 10

Pic 11

Pic 12

Pic 13

https://www.arccaptain.com