ARCCAPTAIN CUT50 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARCCAPTAIN CUT50. ARCCAPTAIN CUT50 20 pages. Plasma cutter 50a

Imprimer la page

3) Operation of the reducer valve

Steps for reducer setting are as follows:

start the gas flow; lift the pressure control

knob upward; adjust the gas pressure to

the desired value by rotating the knob

(rotate to "+" direction to increase gas

pressure; rotate to "-" direction to reduce

gas pressure); press down the pressure

control knob to get the knob locked. The

water can be drained automatically for

auto-drain function is available for the

embedded filter reducer.

4) Installation of the cutting torch

- Insert one end of the electrode into the torch head.

- Insert the other end of the electrode into the

distributor.

- Connect the nozzle with the electrode and

distributor.

- Connect the protective sleeve with the nozzle, screw

it into the torch head, and tighten it.

Digital Welder Expert, Know You More

Pic 7 Installation of the reducer valve

Pic 8 Installation of cutting torch head

https://www.arccaptain.com