ARCCAPTAIN CUT50 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Сварочная система ARCCAPTAIN CUT50. ARCCAPTAIN CUT50 20 страниц. Plasma cutter 50a

3) Operation of the reducer valve

Steps for reducer setting are as follows:

start the gas flow; lift the pressure control

knob upward; adjust the gas pressure to

the desired value by rotating the knob

(rotate to "+" direction to increase gas

pressure; rotate to "-" direction to reduce

gas pressure); press down the pressure

control knob to get the knob locked. The

water can be drained automatically for

auto-drain function is available for the

embedded filter reducer.

4) Installation of the cutting torch

- Insert one end of the electrode into the torch head.

- Insert the other end of the electrode into the

distributor.

- Connect the nozzle with the electrode and

distributor.

- Connect the protective sleeve with the nozzle, screw

it into the torch head, and tighten it.

Digital Welder Expert, Know You More

Pic 7 Installation of the reducer valve

Pic 8 Installation of cutting torch head

https://www.arccaptain.com