ABB ISL-A 24 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler ABB ISL-A 24. ABB ISL-A 24 4 stron. Device for insulation permanent control for isolated networks it

Drukuj stronę

DIMENSIONS

—

TECHNICAL FEATURES

Auxiliary voltage supply

Maximum consumption

Measure current

Internal impedance

Threshold tripping

Tripping delay

Signalling and button

Output

Working and storing temperature

Relative humidity

Insulation test

Mounting position

Wiring type

Protection degree

Mounting according DIN 50022

Weight

Standards

For application not described in this manual it's better to see specific document or to contact the technical

service.

—

NOTE

At reason of the evolution of standards and products, the company reserves to modify in every time the features of the product described

in this document, that it's necessary to verify preventively.

The liability of the producer for damage caused by defect of the product "can be reduced or deleted (...) when the damage is caused joint

by a defect of product or for blame of the damaged or a person of which the damaged is responsible" (Article 8, 85/374/CEE).

2024-01-24

24-48V 50-60Hz/d.c. ± 20%

3 VA-3W

max 0,5 mA

50 kΩ

Settable 10 ÷ 60 kΩ (5 levels with micro-switches)

About 0.2 seconds

led ON, led TRIP, led +, led -

Relay changeover contact NO-C-NC max 250V 5A

-10 ÷ 60°C / -20 ÷ 70°C

≤ 95 %

2,5 kV 60 sec. / 4 kV imp. 1,2/50μs

Any

Screw terminals / cross section cables 4 mm²

Front with cover: IP 40 – Enclosure: IP 20

Snap on DIN rail 35mm / 3 modules 17,5 mm

About 300 g

Safety EN 61010-1

Electromagnetic compatibility IEC-EN 61326-1

Snap on DIN rail 35mm

(DIN 50022)

3 modules 17,5 mm

4/4