Axxess AXi-CANBOX1 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt nagrywający Axxess AXi-CANBOX1. Axxess AXi-CANBOX1 11 stron.

Wiring legend and description

DO NOT CONNECT WIRES BELOW WHEN USED IN

CONJUNCTION WITH AXi PLUG AND PLAY HARNESS.

Red Wire: Constant +12V power input.

Must connect to constant power source, can usually be found at

the main power plug on the back of the radio or at another source

where AXi-CANBOX1 is installed. Do not connect to accessory or

ignition power source. Connecting to +12V constant power will

not drain battery, interface goes into sleep mode after key is

removed and doors are locked.

Black Wire: Ground connection.

Must connect to a ground source, can usually be found at the

main power plug on the back of the radio or at another source

where AXi-CANBOX1 is installed. Do not connect to chassis

ground or radio chassis.

CAN Wires: If installation is going to be performed without plug

and play harness CAN High and CAN Low Wires must be cut and

the AXi-CANBOX1 will be installed in line.

Orange Wire: CAN High radio side.

Connect orange wire to radio side of vehicles CAN High wire.

Green Wire: CAN Low radio side.

Connect green wire to radio side of vehicles CAN Low wire.

Yellow Wire: CAN High car side.

Connect yellow wire to car side of vehicles CAN High wire.

White Wire: CAN Low car side.

Connect white wire to car side of vehicles CAN Low wire.

Blue Wire: External activation switch.

Used only in certain applications.

Purple Wire: Not used, do not connect.

Micro USB: Used for programing and updating

AXi-CANBOX1 must be programmed with a vehicle specific

software before installation starts. Please see pages 7-9 for

details.

Status LED: Blinks when CAN wires properly connected.